From: Gustavo Figueira (gufigueira@ig.com.br)
Date: Sat Jan 04 2003 - 14:30:39 GMT-3
Thank's Stefan !!!!
You are right.....
The command is no peer neighbor-route.
Gustavo
----- Original Message -----
From: "stefan vogt" <stefan-uwe_vogt@web.de>
To: <ccielab@groupstudy.com>; "Gustavo Figueira" <gufigueira@ig.com.br>
Sent: Saturday, January 04, 2003 12:13 PM
Subject: Re: ISDN Question
> Hello Gustavo,
>
> Assume you want to configure an ospf demand-circuit. Then the command you
probably looking for is
> no peer neighbor-route
> See also:
>
http://www.cisco.com/en/US/tech/tk648/tk365/technologies_tech_note09186a0080
09481b.shtml
>
> S.
>
> "Gustavo Figueira" <gufigueira@ig.com.br> schrieb am 04.01.03 16:03:47:
> > Hi group,
> >
> > What is the comand toConfigure the ISDN circuit such that the /32 bit
host
> > routes are not created when the link is established.
> >
> > Thank's
> >
> > Gustavo Figueira de Andrade.
> > .
>
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:41 GMT-3