From: Solomon Ghebremariam (sghebrem@cisco.com)
Date: Fri Jan 03 2003 - 23:59:23 GMT-3
Hi All,
I have :
R7 --- R8 ---- R5
IS IS between R8 and R5. OSPF between R7 and R8.
I created a couple of loopback interfaces in R5 and put them in IS IS and
I see all those routes in R8 fine. I redistribute IS IS to OSPF and vice
versa. I can see all the routes (in R7) except for the segment connecting
R8 and R5. I have a permit statement for that segment when I did redis.
All networks are /24 except the link between R7 and R8 is /25 . How do I
get the segment between R8 and R5 show up in R7 as External OSPF route
besides doing redistribute connected.
R8 config is:
interface Ethernet1/0
ip address 147.4.85.8 255.255.255.0
ip router isis
half-duplex
isis circuit-type level-1
isis priority 15
!
router isis
redistribute ospf 8 metric 60 route-map ospf2isis metric-type external
level-1
net 49.8888.8888.8888.8888.00
is-type level-1
router ospf 8
log-adjacency-changes
area 0 authentication message-digest
redistribute isis level-1 subnets route-map isis2ospf
network 147.4.87.0 0.0.0.127 area 0
neighbor 147.4.87.7 priority 1
access-list 88 permit 170.3.12.0 0.0.1.255
access-list 88 permit 147.4.85.0 0.0.0.255
route-map isis2ospf permit 10
match ip address 88
!
route-map ospf2isis deny 10
match ip address 88
!
route-map ospf2isis permit 20
R5's config is:
interface Loopback12
ip address 170.3.12.1 255.255.255.0
ip router isis
!
interface Loopback13
ip address 170.3.13.1 255.255.255.0
ip router isis
!
interface FastEthernet0/1
ip address 147.4.85.5 255.255.255.0
ip router isis
duplex auto
speed auto
isis circuit-type level-1
isis priority 10
!
router isis
net 49.8888.5555.5555.5555.00
is-type level-1
!
Also here is my debug out put:
2w2d: ISIS-Spf: (accepted)
2w2d: ISIS-Spf: Add 5555.5555.5555.00-00 to TENT, metric 10
2w2d: ISIS-Spf: Next hop 5555.5555.5555 (Ethernet1/0)
2w2d: ISIS-Spf: Move 5555.5555.5555.00-00 to PATHS, metric 10
2w2d: ISIS-Spf: Add 147.4.85.0/255.255.255.0 to IP RIB, metric 20
2w2d: ISIS-Spf: Next hop 5555.5555.5555/147.4.85.5 (Ethernet1/0)
(rejected)
R8#
2w2d: ISIS-Spf: Add 170.3.12.0/255.255.255.0 to IP RIB, metric 20
2w2d: ISIS-Spf: Next hop 5555.5555.5555/147.4.85.5 (Ethernet1/0)
(accepted)
2w2d: ISIS-Spf: Add 170.3.13.0/255.255.255.0 to IP RIB, metric 20
2w2d: ISIS-Spf: Next hop 5555.5555.5555/147.4.85.5(Ethernet1/0)
(accepted)
2w2d: ISIS-Spf: Aging L1 LSP 1 (5555.5555.5555.00-00), version 149
2w2d: ISIS-Spf: Aging L1 LSP 3 (8888.8888.8888.00-00), version 127
2w2d: ISIS-Spf: Aging L1 LSP 5 (8888.8888.8888.01-00), version 17
appreciate ur help
solomon
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:40 GMT-3