From: Tony Schaffran (tschaffran@cconlinelabs.com)
Date: Fri Jan 03 2003 - 15:25:15 GMT-3
If you type "tftpdnld", it shows you a set of parameters that must be set.
These parameters must be entered in cap's. To verify these parameters are
set, type "set" Once you get all of the parameters set, type "tftpdnld"
again. If you are connected to the tftp server with the right address, it
should work.
I hope this helps.
Tony Schaffran
Network Analyst
CCNP, CCNA, CCDA,
NNCSS, NNCDS, CNE, MCSE
www.cconlinelabs.com
"Your #1 choice for Cisco rack rentals."
----- Original Message -----
From: "abderrahim Ibnamar" <a_sadki1@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Friday, January 03, 2003 9:48 AM
Subject: 4000 recovery
> Hi all,
>
> I messed with a 4000.
>
> I was trying to upgrade the IOS and was asked to erase the flash I typed
> "yes".
> Problem is the upgrading failed and now the router does not boot.
> I can only go into the bios.
> Any ideas how I can ugrade the IOS in Bios mode as tftpdnld not Xmodem
work
> on it.
>
> Thanks
>
>
>
>
> _________________________________________________________________
> MSN Search, le moteur de recherche qui pense comme vous !
> http://search.msn.fr/worldwide.asp
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:40 GMT-3