From: Prashanth (prashanthcm@yahoo.com)
Date: Fri Jan 03 2003 - 04:25:44 GMT-3
George,
www.cisco.com/go/module
choose the part num and you get all the info..
has answers to all the modules/WICs for the midrange
modular access routers
I am guessing the WIC-1Ts or better WIC-2Ts will be a
better investment for the WAN links
for the Voice Interface Cards you need the Network
Modules such as NM-1V or 2V
I am guessing that the ATM-25 which can be connected
back to back using a roll-over cable might be the
cheapest ATM NM
-prashanth-
--- george <g.gittins@edinburg.esc1.net> wrote:
> I want to purchase my own cisco gear for the ccie
> lab. However I need
> some assistance in buying the correct modules to do
> voice etc.
>
> If I purchase for example two cisco 2611 with one
> wic-1t if I add a
> vic-2fxs I can do for example voice over frame
> relay,dlc. Now if I
> wanted to do voice over atm? I would need a ls1010
> switch but with what
> modules? And what atm modules on the 2600.what is
> the best deal .
> Can some one explain to me the difference between a
> network module
> slot,and a aim slot?
> .
>
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:39 GMT-3