From: Wolfgang Marschner (wmarschner@web.de)
Date: Thu Jan 02 2003 - 17:41:24 GMT-3
Hello George,
that depends on what you really want!
Do you want to do VoIP over ATM or do you want to do VoATM?
In case of the first one you only must purchase normal ATM-
interfaces like the NM-1A-T3, that's all.
If you really want to do VoATM, you must have for instance
Multiflex-Interfaces and DSP's for the 26xx or some MC3810
routers with ATM ( out of sales now ).
So if you want to prepare for CCIE, first take a look on
the Cisco web site for CCIE lab requirements and than make
a decision. That's all I can tell without violating the rules!
Regards
Wolfgang Marschner / CCIE #8232 R&S
----- Original Message -----
From: "george" <g.gittins@edinburg.esc1.net>
To: <ccielab@groupstudy.com>
Sent: Donnerstag, 2. Januar 2003 23:21
Subject: what modules do i need?
> I want to purchase my own cisco gear for the ccie lab. However I need
> some assistance in buying the correct modules to do voice etc.
>
> If I purchase for example two cisco 2611 with one wic-1t if I add a
> vic-2fxs I can do for example voice over frame relay,dlc. Now if I
> wanted to do voice over atm? I would need a ls1010 switch but with what
> modules? And what atm modules on the 2600.what is the best deal .
> Can some one explain to me the difference between a network module
> slot,and a aim slot?
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:39 GMT-3