From: Hunt Lee (ciscoforme3@yahoo.com.au)
Date: Wed Jan 01 2003 - 04:54:54 GMT-3
Hi
Happy Holiday to all.
I have some question that I would like to ask the group regarding DLSW Peer Groups
and Peer-On-Demand.
I have a home lab where the topology is as follows:
RTA & RTC are DLSW Border Peers, while the others are DLSW Remote Peers
SNA PU2 -- RTE ------- RTA --- RTC --- SNA PU5
| |
RTB RTD
According to Solie, one needs to use "dlsw peer-on-demand-default tcp-queue-max"
command to setup Peer-On-Demand. However, on my setup above, I didn't use it at
all, yet I still gets the POD Peer establiahsed.
RTC#sh dlsw peer
Peers: state pkts_rx pkts_tx type drops ckts TCP uptime
TCP 1.1.1.1 CONNECT 344 342 prom 0 0 0 02:27:42
TCP 5.5.5.5 CONNECT 523 532 pod 0 1 0 00:12:35
TCP 4.4.4.4 CONNECT 312 366 prom 0 0 0 02:25:49
So are DLSW Peer Groups(Border Peers) & Peer-on-Demand the SAME THING???? If not,
what is the difference, & when would one wants to use the "dlsw
peer-on-demand-default tcp-queue-max" command?
Anyway, below are my partial configs:-
RTA#sh run
Building configuration...
hostname RTA
!
!
dlsw local-peer peer-id 1.1.1.1 group 1 border promiscuous
dlsw remote-peer 0 tcp 3.3.3.3
dlsw bridge-group 1
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface FastEthernet0/0
ip address 172.16.3.1 255.255.255.0
speed 10
half-duplex
bridge-group 1
!
interface Serial0/0
description to RTC
ip address 10.64.3.177 255.255.255.240
clockrate 64000
!
!
interface Serial1/2
description to RTB
ip address 10.64.3.99 255.255.255.240
no ip mroute-cache
clockrate 64000
!
interface Serial1/3
description to RTE
ip address 10.64.3.161 255.255.255.240
clockrate 64000
!
router eigrp 1
network 1.0.0.0
network 10.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
!
bridge 1 protocol ieee
!
!
end
RTA#
=====================================================
RTB#sh run
Building configuration...
hostname RTB
!
dlsw local-peer peer-id 2.2.2.2 group 1 promiscuous
dlsw remote-peer 0 tcp 1.1.1.1
dlsw bridge-group 1
!
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface Ethernet0
no ip address
bridge-group 1
!
interface Serial0
description to RTA
ip address 10.64.3.97 255.255.255.240
no fair-queue
!
!
router eigrp 1
network 2.0.0.0
network 10.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
!
!
end
RTB#
=====================================================
RTC#sh run
Building configuration...
!
hostname RTC
!
!
!
!
dlsw local-peer peer-id 3.3.3.3 group 2 border promiscuous
dlsw bridge-group 1
!
interface Loopback0
ip address 3.3.3.3 255.255.255.255
!
interface FastEthernet0/0
no ip address
speed 10
half-duplex
bridge-group 1
!
interface Serial0/0
description to RTA
ip address 10.64.3.178 255.255.255.240
no fair-queue
!
interface Serial0/1
description to RTD
ip address 10.64.3.194 255.255.255.240
!
router eigrp 1
network 3.0.0.0
network 10.0.0.0
no auto-summary
!
!
!
bridge 1 protocol ieee
end
RTC#
========================================================
RTD#sh run
!
hostname RTD
!
!
dlsw local-peer peer-id 4.4.4.4 group 2 promiscuous
dlsw remote-peer 0 tcp 3.3.3.3
dlsw bridge-group 1
!
interface Loopback0
ip address 192.168.1.1 255.255.255.255
!
interface Loopback1
ip address 4.4.4.4 255.255.255.255
!
interface Ethernet0
no ip address
bridge-group 1
!
interface Serial0
description to RTC
ip address 10.64.3.195 255.255.255.240
no fair-queue
clockrate 64000
!
!
router eigrp 1
network 4.0.0.0
network 10.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
!
bridge 1 protocol ieee
!
!
end
RTD#
=================================================
RTE#sh run
!
hostname RTE
!
!
!
dlsw local-peer peer-id 5.5.5.5 group 1 promiscuous
dlsw remote-peer 0 tcp 1.1.1.1
dlsw bridge-group 1
!
!
interface Loopback0
ip address 5.5.5.5 255.255.255.255
!
interface Ethernet0
no ip address
bridge-group 1
!
!
interface Serial1
description to RTA
ip address 10.64.3.162 255.255.255.240
no fair-queue
!
!
router eigrp 1
network 5.0.0.0
network 10.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
!
!
bridge 1 protocol ieee
!
!
end
RTE#
Any help on this topic would be helpful. I am trying to understand how all these 2
component can work together / related?
Thanks.
Hunt Lee
http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:38 GMT-3