From: MADMAN (dave@interprise.com)
Date: Fri Dec 27 2002 - 17:37:29 GMT-3
Your probably missing something along these lines:
interface BRI0
dialer-group 1
!
dialer-list 1 protocol ip permit
dave
John Tafasi wrote:
> Hi Groub,
>
> r2 and r5 are connected via isdn. I am trying to telnet to r5 from r2 but I
> receive the message "No input access group defined for BRI0." Does that mean
> you cannot access a router via its bri interface unless an access list is
> configured on bri0?
>
> r2#telnet 10.10.10.2
> Trying 10.10.10.2 ... Open
>
>
> User Access Verification
>
> Password:
> Password:
> No input access group defined for BRI0.
> [Connection to 10.10.10.2 closed by foreign host]
> .
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill .
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3