From: Brian Dennis (brian@labforge.com)
Date: Fri Dec 27 2002 - 17:17:34 GMT-3
John,
Is "lock and key" security configured on R5?
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Tafasi
Sent: Friday, December 27, 2002 11:51 AM
To: Cisco Group Study; ccielab
Subject: No input access group defined for BRI0
Hi Groub,
r2 and r5 are connected via isdn. I am trying to telnet to r5 from r2
but I
receive the message "No input access group defined for BRI0." Does that
mean
you cannot access a router via its bri interface unless an access list
is
configured on bri0?
r2#telnet 10.10.10.2
Trying 10.10.10.2 ... Open
User Access Verification
Password:
Password:
No input access group defined for BRI0.
[Connection to 10.10.10.2 closed by foreign host]
.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3