From: Ali Fahmi (afahmi@plasa.com)
Date: Fri Dec 27 2002 - 13:07:46 GMT-3
Hi All,
I have a problem with tags on BGP,
This is my scenario
R4(as400)
-------R1(as100)----ospf-----R2(as100)------R3(as200)
There is a redistribution on R2 and R1 to pass routes come
from R3 The objective is, R4 must get routes come from R3
with correct ORIGIN,
Here is my config,
R2.
Router bgp 100
table-mal set-tag
neighbor ...
Router ospf 1
network ....
Redistribute bgp 100 subnets
Ip as-path access-list 1 permit .*
Route-map set-tag permit 10
match as-path 1
set automatic-tag
R1.
Router bgp 100
redistribute ospf 1 match external 2 route-map set-tag
neighbor ...
Router ospf 1
network ...
Route-map set-tag permit 10
set as-path tag
Anybody know where I make a mistake ?
Thx
Ali
===================================================================================
PlasaCom mengadakan Lomba Design Kartu Elektronik dengan tema Natal dan Tahun Baru ... ikutan ya ..berhadiah lho... selengkapnya kunjungi http://www.plasa.com/informasi/lomba-desain
===================================================================================
Tarif Telepon Baru http://www.telkom.co.id
Bila ada spamming atau abuse laporkan ke abuse@plasa.com
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3