From: Joe Chang (changjoe@earthlink.net)
Date: Fri Dec 27 2002 - 10:41:32 GMT-3
As an alternative, if there are too many possible paths between the traffic
endpoints, you could implement a tunnel and apply RSVP on it.
----- Original Message -----
From: "kym blair" <kymblair@hotmail.com>
To: <vjayaram@in.ibm.com>; <ccielab@groupstudy.com>
Sent: Friday, December 27, 2002 4:45 AM
Subject: Re: RSVP query
> Vijay,
>
> You're right, you'll have to know the path between the source and
> destination to reserve bandwidth at every hop. RSVP is to reserve and
> guarantee bandwidth, primaily for voice; less likely applications include
> VPNs and multicast video; but future designs will be more automated.
>
> For now, I would think RSVP will probably only be appied to voice.
> Hopefully there won't be multiple paths between the voice routers. If it
is
> applied to a multicast stream or VPN, it seems like it should be clear
where
> the source and destinations are.
>
> One thing you should be careful to do ... if the RSVP involves a
frame-relay
> subinterface, be sure to apply the RSVP command on *both* the subinterface
> and the physical interface.
>
> I'd like to hear other opinions. Thanks,
>
> Kym
>
>
>
>
>
>
>
> >From: "Vijay S Jayaraman" <vjayaram@in.ibm.com>
> >Reply-To: "Vijay S Jayaraman" <vjayaram@in.ibm.com>
> >To: ccielab@groupstudy.com
> >Subject: RSVP query
> >Date: Fri, 27 Dec 2002 12:40:51 +0530
> >
> >Hi,
> >If I need to reserve bandwidth using RSVP, I need to enable RSVP on all
the
> >interfaces along the entire path of the packet flow......and for each
> >multiple paths too...Is this right?
> >
> >So If I get a question on the lab to reserve bandwidth for a flow and its
> >not mentioned where the packet flow is terminating, what would I need to
do
> >to get a 100% on the question?
> >
> >Regards,
> >Vijay.
> >.
> _________________________________________________________________
> Add photos to your messages with MSN 8. Get 2 months FREE*.
>
http://join.msn.com/?page=features/featuredemail&xAPID=42&PS=47575&PI=7324&D
I=7474&SU=
>
http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_addphotos_3
mf
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3