From: Aamer Kaleem (kaleemaamer@yahoo.com)
Date: Thu Dec 26 2002 - 22:50:55 GMT-3
On RTRB you need to specify icanreach mac-address
(00-50-04-B9-45-84) in bit-swapped format....
Thank you,
Aamer
--- Hunt Lee <ciscoforme3@yahoo.com.au> wrote:
> Merry Christmas and Happy New Year!!! I can't find
> anything else better to do than
> to play with my routers. So much fun! =)
>
> My question - is there any trick to the commands:-
>
> dlsw icanreach mac-exclusive
> &
> dlsw icanreach mac-address <xxxx.xxxx.xxxx>?
>
> I have the following lab setup:-
>
> RTA
> / \
> WebCentral11---RTB RTC --- Hardcat-laptop
>
> Both workstations are on Ethernet.
>
> And the three routers are in a Frame-relay network.
>
> I must have done something fundermentally wrong.
> Since if I remove the 2 icanreach
> commands, everything is ok (i.e. I can see Network
> neighborhood, I can see the DLSW
> circuit up etc). But as soon as I put back the
> commands, I can't see anything.
>
> My laptop (WebCentral11)'s MAC address is
> 0050.04b9.4584.
>
> C:\>ipconfig /all
>
>
> Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : FE575C-3COM
> 10/100 LAN CardBus-Fast Ethernet
> Physical Address. . . . . . . . . :
> 00-50-04-B9-45-84
> Dhcp Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> Autoconfiguration IP Address. . . : 169.254.205.7
> Subnet Mask . . . . . . . . . . . : 255.255.0.0
> Default Gateway . . . . . . . . . :
>
> C:\>
>
> And I have confirmed it with:-
>
> RTB#sh bridge
>
> Total of 300 station blocks, 298 free
> Codes: P - permanent, S - self
>
> Bridge Group 1:
>
> Address Action Interface Age RX
> count TX count
> 0050.ba76.ea5f forward DLSw Port0 0
> 1 1
> 0050.04b9.4584 forward Ethernet0 0
> 1 0
> RTB#
>
> RTC#sh bridge
>
> Total of 300 station blocks, 298 free
> Codes: P - permanent, S - self
>
> Bridge Group 1:
>
> Address Action Interface Age RX
> count TX count
> 0050.ba76.ea5f forward Ethernet0 0
> 9 1
> 0050.04b9.4584 forward DLSw Port0 0
> 1 3
> RTC#
>
> And here's the config:-
>
> For RTB-
>
> dlsw local-peer peer-id 1.1.1.1 promiscuous
> dlsw icanreach mac-exclusive
> dlsw icanreach mac-address 0050.04b9.4584 mask
> ffff.ffff.ffff
> dlsw bridge-group 1
>
> interface Loopback0
> ip address 1.1.1.1 255.255.255.255
>
> interface Ethernet0
> no ip address
> bridge-group 1
>
> bridge 1 protocol ieee
>
> As for RTC-
>
> dlsw local-peer peer-id 2.2.2.2
> dlsw remote-peer 0 tcp 1.1.1.1
> dlsw bridge-group 1
>
> interface Loopback1
> ip address 2.2.2.2 255.255.255.255
>
> interface Ethernet0
> no ip address
> bridge-group 1
>
> bridge 1 protocol ieee
>
>
> It would be greatly appreciated if anyone can shed
> some light on this.
>
>
> Hunt
>
> http://movies.yahoo.com.au - Yahoo! Movies
> - What's on at your local cinema?
> .
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3