Caslow's Dialer Map with PPP example

From: cebuano (cebu2ccie@cox.net)
Date: Thu Dec 26 2002 - 21:34:52 GMT-3


Hello gang.
I'm testing Caslow's sample configuration on Dialer Map with PPP on page
173, but can't figure out why the BRI channel would be UP yet the
routers can't ping each other. Unfortunately, he has no follow up on
this AFAIK. Please tell me what it is he's trying to say and I'm not
seeing. Thanks.
 
// Dialer Map with PPP
// Calling Router...
2503#s
!
isdn switch-type basic-ni
!
interface BRI0
 ip address 172.16.1.1 255.255.255.0
 encapsulation ppp
 dialer map ip 172.16.1.2 8358662
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 0835866101 8358661
 isdn spid2 0835866301 8358663
!
dialer-list 1 protocol ip permit
!
 
 
// Called Router...
2516#s
!
isdn switch-type basic-ni
!
interface BRI0
 ip address 172.16.1.2 255.255.255.0
 encapsulation ppp
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 0835866201 8358662
 isdn spid2 0835866401 8358664
!
dialer-list 1 protocol ip permit
!
 
2503#ping 172.16.1.2
 
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.2, timeout is 2 seconds:
 
00:47:37: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
00:47:37: BR0:2 PPP: Treating connection as a callout
00:47:37: BR0:2 PPP: Phase is ESTABLISHING, Active Open
00:47:37: BR0:2 PPP: No remote authentication for call-out
00:47:37: BR0:2 LCP: O CONFREQ [Closed] id 1 len 10
00:47:37: BR0:2 LCP: MagicNumber 0xE0DBF10F (0x0506E0DBF10F)
00:47:37: BR0:2 LCP: I CONFREQ [REQsent] id 1 len 10
00:47:37: BR0:2 LCP: MagicNumber 0x00372469 (0x050600372469)
00:47:37: BR0:2 LCP: O CONFACK [REQsent] id 1 len 10
00:47:37: BR0:2 LCP: MagicNumber 0x00372469 (0x050600372469)
00:47:37: BR0:2 LCP: I CONFACK [ACKsent] id 1 len 10
00:47:37: BR0:2 LCP: MagicNumber 0xE0DBF10F (0x0506E0DBF10F)
00:47:37: BR0:2 LCP: State is Open
00:47:37: BR0:2 AUTH: Started process 0 pid 44
00:47:37: BR0:2 PPP: Phase is UP
00:47:37: BR0:2 IPCP: O CONFREQ [Closed] id 1 len 10
00:47:37: BR0:2 IPCP: Address 172.16.1.1 (0x0306AC100101)
00:47:37: BR0:2 CDPCP: O CONFREQ [Closed] id 1 len .4
00:47:37: BR0:2 IPCP: I CONFREQ [REQsent] id 1 len 10
00:47:37: BR0:2 IPCP: Address 172.16.1.2 (0x0306AC100102)
00:47:37: BR0:2 IPCP: O CONFACK [REQsent] id 1 len 10
00:47:37: BR0:2 IPCP: Address 172.16.1.2 (0x0306AC100102)
00:47:37: BR0:2 CDPCP: I CONFREQ [REQsent] id 1 len 4
00:47:37: BR0:2 CDPCP: O CONFACK [REQsent] id 1 len 4
00:47:37: BR0:2 IPCP: I CONFACK [ACKsent] id 1 len 10
00:47:37: BR0:2 IPCP: Address 172.16.1.1 (0x0306AC100101)
00:47:37: BR0:2 IPCP: State is Open
00:47:37: BR0:2 CDPCP: I CONFACK [ACKsent] id 1 len 4
00:47:37: BR0:2 CDPCP: State is Open
00:47:37: BR0 IPCP: Install route to 172.16.1.2
00:47:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2,
changed state to up...
00:47:43: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 8358662
.
Success rate is 0 percent (0/5)
 
2503#ping 172.16.1.2
 
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
 
 
2503#sh int bri 0 2
BRI0:2 is up, line protocol is up
  Hardware is BRI
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Keepalive set (10 sec)
  Time to interface disconnect: idle 00:03:48
  LCP Open
  Open: IPCP, CDPCP
  Last input 00:00:02, output 00:00:02, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations 0/1/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     96 packets input, 7278 bytes, 0 no buffer
     Received 57 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     133 packets output, 11341 bytes, 0 underruns
     0 output errors, 0 collisions, 19 interface resets
     0 output buffer failures, 0 output buffers swapped out
     13 carrier transitions
 
2516#sh int bri 0 1
BRI0:1 is up, line protocol is up
  Hardware is BRI
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Keepalive set (10 sec)
  Time to interface disconnect: idle 00:01:19
  LCP Open
  Open: IPCP, CDPCP
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 1/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations 0/1/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     159 packets input, 13171 bytes, 0 no buffer
     Received 77 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     141 packets output, 9410 bytes, 0 underruns
     0 output errors, 0 collisions, 16 interface resets
     0 output buffer failures, 0 output buffers swapped out
     23 carrier transitions
 
2516#ping 172.16.1.1
 
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
.



This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3