From: liwei@gwtt.com
Date: Tue Dec 24 2002 - 05:56:21 GMT-3
I had added "dialer-list 1 protocol ip permit
but no anything happened what the primary line down.
:(
----- Original Message -----
From:liwei@gwtt.com
To:ccielab@groupstudy.com
Subject:what's wrong with my config dial backup ,ungent
Date:Tue, 24 Dec 2002 16:03:58 +0800
>calling router:
>huidong#sh running-config
>Building configuration...
>
>Current configuration : 2439 bytes
>....igored......
>!
>username Central password 0 cisco
>ip subnet-zero
>!
>!
>no ip domain-lookup
>!
>chat-script CALLOUT "" "atdt\T" TIMEOUT 60 CONNECT \c
>modemcap entry usr:MSC=&FS0=1&C1&D2&H1&R2&B1&W
>!
>fax interface-type fax-mail
>mta receive maximum-recipients 0
>!
>!
>!
>!
>interface Loopback1
> ip address 1.1.1.1 255.255.255.255
>!
>interface Serial0/0
> description "2M line to FenJu 10.4.225.9"
> backup interface Serial0/2
> ip address 10.4.225.10 255.255.255.252
> ip rtp header-compression
> ip rtp compression-connections 25
>!
>interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
>!
>interface Serial0/1
> no ip address
> shutdown
> clockrate 2000000
>!
>interface Serial0/2
> physical-layer async
> ip unnumbered Loopback1
> encapsulation ppp
> dialer in-band
> dialer map ip 2.2.2.1 name Central modem-script CALLOUT 075582235934
> dialer-group 1
> async mode dedicated
> no peer default ip address
> no fair-queue
> ppp authentication chap callin
>!
>interface Serial0/3
> no ip address
> shutdown
> clockrate 125000
>!
>router ospf 1
> log-adjacency-changes
>!
>ip classless
>ip route 0.0.0.0 0.0.0.0 Serial0/0 180
>ip route 0.0.0.0 0.0.0.0 Serial0/2 254
>ip route 2.2.2.1 255.255.255.255 Serial0/0
>ip route 2.2.2.1 255.255.255.255 Serial0/2 254
>no ip http server
>ip pim bidir-enable
>!
>!
>!
>!
>line con 0
> exec-timeout 0 0
>line 3
> script dialer CALLOUT
> modem DTR-active
>modem autoconfigure discovery
> transport input all
> stopbits 1
> speed 115200
> flowcontrol hardware
>line aux 0
>line vty 0 4
> password cisco
> login
>!
>!
>end
>.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:52 GMT-3