From: John Matijevic (matijevic@telocity.com)
Date: Tue Dec 24 2002 - 02:21:44 GMT-3
Jennifer,
Try the following under R1,
add a different ip address, because your using the same for both routers,
then try maping it to a dlci (ex.frame-relay map ip 100.100.200.2 100
broadcast),
never tried using the frame-relay switch as a router, but I believe should
work.
Sincerely,
John
----- Original Message -----
From: "Jennifer Bellucci" <Jennifer_bellucci@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, December 23, 2002 10:39 PM
Subject: Frame Relay lost idea
> Hi All...try this
>
> I have the following:
>
> R1-----R2
>
> R1 is the FR Switch and also wants to take part in the FR network like R2.
> I have configured R1 like so
>
> !
> frame sw
> int s0
> clock rate 56000
> encap frame
> frame lmi-type ansi
> frame intf-type dce
> frame route 100 int s2 200
> ip add 100.100.200.1 255.255.0.0
> no shut
> !
> int s2
> desc CONNECTED TO R2
> encap frame
> frame lmi-type ansi
> frame intf-type dce
> frame route 200 int s0 100
> no shut
> !
>
> r2
> !
> int s0
> encap frame
> frame lmi-type ansi
> clock rate 56000
> ip add 100.100.200.2 255.255.0.0
> frame map ip 100.100.200.1 200 bro
> no shut
> !
>
> The ping obviously fails. I know I am doing something fundamentally wrong.
Is
> the config even possible? I was thinking that as the subnet was attached
to S0
> on R1-FR then any ping packet would be sent out this interface, in which
case
> how do I get my config to work? I want to send the ping/all packets on R1
S0
> to int s2 on the same router.
> *Also, I entered the command "frame map ip 100.100.200.2 100 bro" on R1 S0
> before inserting the frame route statements, made no difference.
>
> Please do not hurl abuse at me ( I've already done that).
>
> Would a possible solution be possible with another serial interface? would
it
> matter if the interface was connected to a device?
>
> Thanks alot
>
> Jennifer Bellucci
>
> Jennifer_bellucci@hotmail.com
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:52 GMT-3