Re: OSPF: distribute-lists

From: Richard Hanks (ccieingroup@hotmail.com)
Date: Tue Dec 24 2002 - 00:01:20 GMT-3


Hi Sage,
Are you sure your extended access-list works fine with the distribute-list? I
have tried it in my lab but it didn't work at all. That is why I changed the
configuration to you from your 108 to 1 last time.

Richard Hanks
  ----- Original Message -----
  From: Sage Vadi
  To: Cliff Moseley
  Cc: ccielab@groupstudy.com
  Sent: Monday, December 23, 2002 12:16 AM
  Subject: Re: OSPF: distribute-lists

  Cliff,

  ACL type is irrelevant.

  I have tested in my lab with extended it works fine.

  The problem I was doing was not using "distribute list
  in", my mistake was adding the "interface" keyword to
  the end of this command. And also forgettng about
  LSAs/OSPF database, so my distribute-list will now be
  put into R1.

  This is my config for my distribute-lists - indeed it
  is based on a named ACL.

  ip access-list standard DISTLIST
   deny 160.160.0.0 0.0.3.255
   permit any

   --- Cliff Moseley <cliffmoseley@hotmail.com> wrote: >
  use a standard access-list
>
>
>
> >From: Sage Vadi <sagevadi@yahoo.co.uk>
> >Reply-To: Sage Vadi <sagevadi@yahoo.co.uk>
> >To:
> >Subject: OSPF: distribute-lists
> >Date: Sun, 22 Dec 2002 10:20:06 +0000 (GMT)
> >
> >This is what CCO says:
> >
> >Q: Can I use the distribute-list in/out command
> with
> >OSPF to filter routes?
> >
> >A: OSPF routes can't be filtered from entering the
> >OSPF database. The distribute-list in command only
> >filters routes from entering the routing table, but
> it
> >doesn't prevent link-state packets from being
> >propagated.
> >
> >~~~ MY PROBLEM ~~~
> >
> >Diagram:
> >
> >R1
> >|
> >R2--R3
> >
> >R1 learns 160.160.0.0/22 from R2, R2 learns this
> from
> >R3. Fairly simple right?
> >
> >I want to put a distribute-list inbound on R2's
> serial
> >interface to prevent R1 from learning this
> >route/network.
> >
> >Config on R2 here:
> >
> >distribute-list 108 in Serial1/0
> >access-list 108 deny ip 160.160.0.0 0.0.3.255 any
> >
> >Problem:
> >
> >R1 still has the route in it's routing table!!!
> Doh!
> >CCO says it should not be in the routing table, but
> it
> >should be in the OSPF database.
> >
> >Q) Any tips/help/suggestions?
> >
> >rgds,
> >Sage
> >
> >
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Everything you'll ever need on one web page
> >from News and Sport to Email and Music Charts
> >http://uk.my.yahoo.com
> >.
>
>__________________________________________________________________
> >To unsubscribe from the CCIELAB list, send a
> message to
> >majordomo@groupstudy.com with the body containing:
> >unsubscribe ccielab
>
>
>
  _________________________________________________________________
> Protect your PC - get McAfee.com VirusScan Online
>
  http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>

  __________________________________________________
  Do You Yahoo!?
  Everything you'll ever need on one web page
  from News and Sport to Email and Music Charts
  http://uk.my.yahoo.com
  .
.



This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:52 GMT-3