From: cebuano (cebu2ccie@cox.net)
Date: Sat Dec 21 2002 - 20:17:14 GMT-3
I say check the Command reference for the proper syntax. There you'll
find the answer.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cisco Nuts
Sent: Saturday, December 21, 2002 2:11 PM
To: cisco@groupstudy.com
Subject: QOS via ACL on the 3550 ?? [7:59680]
Hello,Now that I've finally got my hands on 2 3550's, I am diving
straight into the QOS section ( the one I fear the most in the Lab), had
a question on classifying traffic via acl.On CCO, I see the following
examples:mls qosaccess-list 100 permit ip any any dscp 32access-list 100
permit ip host 10.1.1.1 host 10.1.1.2 precedence 5access-list 102 permit
pim any 224.0.0.2 dscp Question is: Once you created these acl's, do
you
have to apply it to an interface like on a router? I don't see any
except
when it is created for applying it under a class-map. Please
advise.Thank
you.Sincerely,CN
------------------------------------------------------------------------
MSN 8: advanced junk mail protection and 3 months FREE*.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:50 GMT-3