From: Tim Fletcher (tim@fletchmail.net)
Date: Fri Dec 20 2002 - 12:50:24 GMT-3
Sam,
Take a look at IP Muticast Helper
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c/ipcprt3/1cdmulti.htm#xtocid93.
Only works with UDP though.
-Tim Fletcher
At 10:11 AM 12/20/2002 -0500, Sam.MicroGate@usa.telekom.de wrote:
>Hello Group,
>
>If I have an application that is running on hosts that are in the edge of a
>multicast network. This application is sending data to multiple hosts but
>does not support multicast. How can configure/optimize the routers in the
>multicast networks to support this application. I do not have config or
>detailed scenario. But I am searching for the concept. Thanks.
>
>Sam
>.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:50 GMT-3