Re: unicast-2-multicast

From: Abdallah Al-Suwailem (aalsuwailem@myrealbox.com)
Date: Mon Dec 16 2002 - 13:08:02 GMT-3

• Next message: Kumar, Senthil: "RE: unicast-2-multicast"
• Previous message: Brian McGahan: "RE: Aux Port as Backup Dial Up Interface"
• Maybe in reply to: Kumar, Senthil: "unicast-2-multicast"
• Next in thread: Kumar, Senthil: "RE: unicast-2-multicast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello

check this command "r2(config-if)#ip multicast helper-map"

r2(config-if)#ip multicast ?
  boundary Boundary for administratively scoped multicast addresses
  helper-map Broadcast to Multicast map OR Multicast to Broadcast map
  rate-limit Rate limit multicast data packets
  tagswitch Enable IP Multicast Tagswitching
  ttl-threshold TTL threshold for multicast packets

Thanks

Abdallah

Kumar, Senthil wrote:

>can nat convert all traffic on a local network, @ port xx.udp to mulitcast,
>haven't got a traffic generator to test.
>the idea is for the host on my brodcast lan to send data to multicast
>machines hops away. my firsthop doesnt do mulitcast routing..
>
>any ideas, help very appreciated.
>
>Thanks, Senthil
>
>
>
>
>________________________________________________________________________
>This message has been checked for all known viruses by the
>CitC Virus Scanning Service powered by SkyLabs. For further information visit
>http://www.citc.it
>
>___
>.
.

• Next message: Kumar, Senthil: "RE: unicast-2-multicast"
• Previous message: Brian McGahan: "RE: Aux Port as Backup Dial Up Interface"
• Maybe in reply to: Kumar, Senthil: "unicast-2-multicast"
• Next in thread: Kumar, Senthil: "RE: unicast-2-multicast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:46 GMT-3