From: Evgeny Tantsura (ivgen@castel.nl)
Date: Mon Dec 16 2002 - 07:01:43 GMT-3
1. Static RP
2. Auto RP in combination with access-list
ip pim send-rp-announce Loopback0 scope 10 group-list 45
ip pim send-rp-announce Loopback1 scope 10 group-list 46
ip pim send-rp-discovery scope 10
access-list 45 permit 224.0.0.0 0.255.255.255
access-list 45 permit 227.0.0.0 0.255.255.255
access-list 45 deny 225.0.0.0 0.255.255.255
access-list 46 permit 226.0.0.0 0.255.255.255
> How would one assign one RP for certain routes, and another RP for other
> routes? Seems like it should be possible, but I'm not clear on the "how".
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:46 GMT-3