RE: vlans with the 6509

From: LoizosCisco (david_steven2001@yahoo.com)
Date: Fri Dec 13 2002 - 23:54:24 GMT-3

Both Native and Hybrid are running IOS don't they?

Native mode is behaving like a router (no vlans).

Hybrid mode is behaving both as router and switch and
must configure vlans..

http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a0080116ff0.shtml

6509 command reference:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00800fb5d2.html

--- "R. Scott King" <scking@cisco.com> wrote:
> If your Sup is running IOS, it's Native.
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> george gittins
> Sent: Friday, December 13, 2002 12:52 PM
> To: ccielab@groupstudy.com
> Subject: FW: vlans with the 6509
>
>
> How would I know?.hybrid is set based, my 6509 has
> also a layer 3 module
> built in.
>
> George Gittins
> Network and Computer Maintenance Supervisor
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of R.
> Scott King
> Sent: Friday, December 13, 2002 12:32 PM
> To: george gittins
> Cc: ccielab@groupstudy.com
> Subject: RE: vlans with the 6509
>
> Is your 6500 running Native or Hybrid code?
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> Larry Letterman
> Sent: Friday, December 13, 2002 11:10 AM
> To: george gittins
> Cc: ccielab@groupstudy.com
> Subject: Re: vlans with the 6509
>
>
> switch-1(enable) set vlan 10 name myvlan 5/1-48
>
> the above sets up a vlan with the id number 10, with
> the name myvlan and
> puts all the ports in module 5
> in that vlan......
>
> george gittins wrote:
>
> >Does anyone have an example or a link to configure
> vlans with the 6500
> >family
> >
> >
> >
> >George Gittins
> >
> >Network and Computer Maintenance Supervisor
> >.
> .
> .
> .
> .
>

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3