From: Brian T. Albert (brian.albert@worldnet.att.net)
Date: Fri Dec 13 2002 - 22:59:50 GMT-3
Don,
I have a setup in my lab with a router outside the pix configured as a NTP
master and a router inside the firewall configured as a NTP server. My 501
runs 6.22 and has no problem allowing the return connection from the master
back to the server. I have no entry in my acl on the outside interface to
accomplish this. Can you supply your configs?
Brian T. Albert
CCIE #9682
brian.albert@worldnet.att.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Don
Sent: Friday, December 13, 2002 6:13 PM
To: ccielab@groupstudy.com
Subject: NTP through a PIX 501
Anyone know how to allow NTP clients behind a PIX 501 running 6.22 to do a
time request? In my network, the NTP clients try to contact the time server
on the Internet, but the PIX does not allow the response from the server
back into the network.
Thanks, Don
.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3