From: Larry Letterman (lletterm@cisco.com)
Date: Fri Dec 13 2002 - 18:21:18 GMT-3
Hybrid is where your sup runs catos and the router module runs the ios...
if you can doa session command to the sup for switch based functions
then your running hybrid...Most usp's are sent from the factory in
hybrid mode...
george gittins wrote:
>How would I know?.hybrid is set based, my 6509 has also a layer 3 module
>built in.
>
>George Gittins
>Network and Computer Maintenance Supervisor
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of R.
>Scott King
>Sent: Friday, December 13, 2002 12:32 PM
>To: george gittins
>Cc: ccielab@groupstudy.com
>Subject: RE: vlans with the 6509
>
>Is your 6500 running Native or Hybrid code?
>
>
>R. Scott King
>Network Consulting Engineer
>Cisco Systems, Inc.
>Infrastructure Engineering Services - SP
>9155 E. Nichols Avenue Suite 400
>Englewood, CO 80112
>720.895.6056 (desk)
>720.244.5879 (cell)
>
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Larry Letterman
>Sent: Friday, December 13, 2002 11:10 AM
>To: george gittins
>Cc: ccielab@groupstudy.com
>Subject: Re: vlans with the 6509
>
>
>switch-1(enable) set vlan 10 name myvlan 5/1-48
>
>the above sets up a vlan with the id number 10, with the name myvlan and
>puts all the ports in module 5
>in that vlan......
>
>george gittins wrote:
>
>>Does anyone have an example or a link to configure vlans with the 6500
>>family
>>
>>
>>
>>George Gittins
>>
>>Network and Computer Maintenance Supervisor
>>.
>>
>.
>.
>.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3