From: Bob Sinclair (bsin@cox.net)
Date: Thu Dec 12 2002 - 20:16:32 GMT-3
R. Scott,
When you configure the RP, add an access-list that defines the groups that
this RP should handle.
Check out this link watch the wrap:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c
/ipcprt3/1cdmulti.htm#xtocid19
Bob Sinclair
CCIE #10427
----- Original Message -----
From: "R. Scott King" <scking@cisco.com>
To: "Groupstudy" <ccielab@groupstudy.com>
Sent: Thursday, December 12, 2002 4:52 PM
Subject: Multicast
> How would one assign one RP for certain routes, and another RP for other
> routes? Seems like it should be possible, but I'm not clear on the "how".
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:44 GMT-3