From: Brian McGahan (brian@cyscoexpert.com)
Date: Thu Dec 12 2002 - 15:25:09 GMT-3
Jay,
A route-map can only be applied during redistribution in the
context of IGP. If you have a complex routing policy that merits
changing attributes as prefixes enter/leave the router, you'd have to
run BGP.
What exactly are you trying to accomplish?
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Jay Greenberg
> Sent: Thursday, December 12, 2002 10:36 AM
> To: ccielab@groupstudy.com
> Subject: set-metric route-map with EIGRP
>
> Can route-maps with #set metric be used with EIGRP only during
> redistribution? Or is there some way to use #set metric manually
during
> incoming / outgoing routing updates other than using an offset-list.
>
> Jay
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:44 GMT-3