From: Erick B. (erickbe@yahoo.com)
Date: Thu Dec 12 2002 - 02:35:10 GMT-3
This can happen if you type a bad command at the
prompt and it tries to do a DNS lookup. It sends that
request out all interfaces.
--- Tran Tien Phong <PhongTT2@FPT.COM.VN> wrote:
> Hi guys,
>
> When configuring DDR between 2 sites, I noticed that
> the broadcast still triggered the call. The "show
> dialer" displayed: Dial reason: source: x.x.x.x,
> destination: 255.255.255.255.
>
> The interesting traffic was defined: dialer-group 1,
> dialer-list 1 protocol ip permit
> Also, I used the command "no ip directed-broadcast"
> and "no cdp enable" at both sides and no routing
> protocols running between two sides.
>
> Anyone can tell me why broadcast packet still
> trigger the call and how to prevent this?
>
> Thanks
> Tran Tien Phong
> .
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:44 GMT-3