Re: 3550s with Etherchannel

From: Cristian Henry H (chenry@reuna.cl)
Date: Wed Dec 11 2002 - 18:00:41 GMT-3

• Next message: CCOnlineLabs.com: "Re: Lightstream LS100 funnies"
• Previous message: Sam.MicroGate@usa.telekom.de: "RE: eigrp on nbma network"
• Maybe in reply to: R. Scott King: "3550s with Etherchannel"
• Next in thread: iron_tri: "Re: 3550s with Etherchannel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Are you using the command "switchport mode trunk" also?, I think you
need both

"R. Scott King" wrote:
>
> I've got a pair of 3550s on which ports 1&2 on each switch are grouped into
> an Etherchannel. When I go to remove vlan 2 from the trunk, it removes all
> vlans instead of just 2. If I put back all the vlans, everything comes
> back. Anyone else seen this?
>
> "switchport trunk allowed vlan remove 2" is the command I'm using.
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
> .

-- 
Cristian E. Henry
REUNA
E-mail: chenry@reuna.cl
Fono: 56-2-3370336
.

• Next message: CCOnlineLabs.com: "Re: Lightstream LS100 funnies"
• Previous message: Sam.MicroGate@usa.telekom.de: "RE: eigrp on nbma network"
• Maybe in reply to: R. Scott King: "3550s with Etherchannel"
• Next in thread: iron_tri: "Re: 3550s with Etherchannel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:43 GMT-3