From: Bauer, Rick (BAUERR@toysrus.com)
Date: Tue Dec 10 2002 - 10:33:49 GMT-3
The eigrp neighbor command is used to set up static neighbors by sending
unicasts and ignoring multicasts, however, there is a warning in the link
below along with a bug report on this feature, though it can not be found
any more.
http://www.cisco.com/warp/customer/103/eigrpfaq.shtml
HTH....
Rick, #9482
-----Original Message-----
From: Ram Shummoogum [mailto:rshummoo@ca.ibm.com]
Sent: Monday, December 09, 2002 7:02 PM
To: ccielab@groupstudy.com
Subject: eigrp neighbor command
Hi All:
Under the router eigrp xxx there is a neighbor command. I can't find any
doc on this command.
I am assuming that it is used to define static neighbors.???
Can someone shed some light please.
cheers,
RAM-514-205-6612
.
========================================================================
This email message is for the sole use of the intended recipient (s) and may
contain confidential and privileged information. Any unauthorized review,
use, disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and destroy all copies
of the original message. To reply to our email administrator directly, send
an email to EmailAdmin@toysrus.com.
Toys "R" Us, Inc.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:42 GMT-3