From: Tran Tien Phong (PhongTT2@FPT.COM.VN)
Date: Tue Dec 10 2002 - 06:48:24 GMT-3
Could you put the configs of R2?
Does R2 use physical interface or subinterface point-to-point?
If R2 does not use subinterface point-to-point, remember to put the
"broadcast" keyword at the end of the "frame-relay map" statement.
Also, make sure that the following is the same for both ends:
- ip ospf network <network type>
- ip ospf hello-interval
HTH
-----Original Message-----
From: roger@sysage.com.cn [mailto:roger@sysage.com.cn]
Sent: Tuesday, December 10, 2002 3:27 PM
To: Angelo De Guzman; ccielab@groupstudy.com
Subject: OSPF OVER FRAME-RELAY ??????????????
I CAN PING R2 FROM R1 BUT OSPF area 0 IS inactive
And ospf database can't be update each other
Why ?
Reference command and show
Show ospfneighber
Neighbor ID Pri State Dead Time Address
Interface
172.20.6.250 1 EXSTART/ - 00:01:41 57.247.250.18
Serial0/0.1
show ip ospf interface s0.1
Serial0/0.1 is up, line protocol is up
Internet Address 57.247.250.17/30, Area 0
Process ID 100, Router ID 202.38.149.250, Network Type POINT_TO_POINT,
Cost: 3
90
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
Hello due in 00:00:09
Index 1/1, flood queue length 0
Next 0x0 /0x0
Last flood scan length is 0,
R1----------------R2
R1:
nterface Serial0/0
bandwidth 256
no ip address
encapsulation frame-relay
no ip mroute-cache
no fair-queue
frame-relay traffic-shaping
no frame-relay inverse-arp
!
interface Serial0/0.1 point-to-point
ip address 57.247.250.17 255.255.255.252
ip ospf network point-to-point
ip ospf cost 390
ip ospf hello-interval 30
frame-relay interface-dlci 401 IETF
class 128k
!
interface Ethernet0/1
no ip address
no ip mroute-cache
shutdown
half-duplex
no cdp enable
!
router ospf 100
log-adjacency-changes
passive-interface Ethernet0/0
network 57.247.250.16 0.0.0.3 area 0
network 202.38.149.0 0.0.0.255 area 0
!
ip classless
no ip http server
ip ospf name-lookup
ip pim bidir-enable
!
!
map-class frame-relay 128k
frame-relay adaptive-shaping becn
frame-relay cir 192000
frame-relay bc 24000
frame-relay be 0
frame-relay mincir 128000
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password 7 121A0C041104
login
!
end
.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:42 GMT-3