From: Brian McGahan (brian@cyscoexpert.com)
Date: Tue Dec 10 2002 - 01:45:52 GMT-3
As a loop prevention mechanism, iBGP learned prefixes are not
candidate for redistribution into IGP by default. To change this
behavior, use the 'bgp redistribute-internal' command under the BGP
process.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_
summary_chapter09186a008007fc7f.html#xtocid18
bgp redistribute-internal
To allow the redistribution of internal Border Gateway Protocol (iBGP)
routes into an Interior Gateway Protocol (IGP) such as Intermediate
System-to-Intermediate System (IS-IS) or Open Shortest Path First
(OSPF), use the bgp redistribute-internal command in address family
configuration mode. To restore the system to the default condition, use
the no form of this command.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> aansar@sscomp.com.sg
> Sent: Monday, December 09, 2002 9:35 PM
> To: 'ccielab@groupstudy.com '
> Subject: bgp to ospf redistribution
>
> any issue or consideration with bgp to ospf redistribution .
> when i try to redistribute the bgp routes in to ospf , the IBGP routes
are
> not redistributed , EBGP routes are redistributed no problem .. any
> advice
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:42 GMT-3