RE: Ospf stub and NSSA problem

From: Debbie Westall (dwestall@debbie.coxfiber.net)
Date: Mon Dec 09 2002 - 22:32:36 GMT-3


On Mon, 9 Dec 2002, Sanfilippo, Ted wrote:

> Is your IP OSPF NEtwork statements the same on each Frame-relay interface?
>
> In other words when you do a "Show IP OSPF interfaces" for all three routers
> ( R1,R2 and R3) do they show up with the same network type?

Each interface shows BROADCAST as the interface type.

Debbie

>
> -----Original Message-----
> From: Scott Page [mailto:scpage@cisco.com]
> Sent: Monday, December 09, 2002 4:36 PM
> To: Debbie Westall; ccielab@groupstudy.com
> Subject: RE: Ospf stub and NSSA problem
>
>
> You can always use a tunnel from r2 to r3. Dont know if it is allowed in
> your scenario..but just a suggestion.
>
> Jake
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Debbie Westall
> Sent: Monday, December 09, 2002 3:18 PM
> To: ccielab@groupstudy.com
> Cc: ccielab@groupstudy.com
> Subject: Ospf stub and NSSA problem
>
>
> I'm working on a lab and need alittle help.....
>
> Here's the diagram:
>
> ------- ------
> | R1 |------------ | R3 |
> ------- -------
> |
> |
> -------
> | R2 |
> -------
> |
> |
> ------
> | R5 |
> -------
>
> * There is frame-relay, fully meshed between R1, R2 & R3., R5 is connected
> via ethernet.
> * R1 (all interfaces), area 1
> * R2 (loopback2, s0/0.1and s0/0.2) - area 1
> * R3 (s0/0.1 & s0/0.2) are in OSPF area 1
> * Area 1 is an NSSA.
> * R3 (interfaces L0, L1, & L2 are area 0), e0/0 is area 3.
> * R5 (Interfaces e0/0, L0) area Area 2.
> * Area 2 is a stub network.
>
> I don't see routes in R3 to R5, except for the directly connected. And
> vice versa from R5 to R3. In addition, on R5 I have formed a neighbor
> relationship, but have no routing table, except for the directly
> connected.
>
> I tried setting up a virtual link through Area 1, but it will not because
> Area 1 is an NSSA.
>
> I don't know what I'm missing.
>
> Thanks for any assistance
>
> Debbie
> .
> .
.



This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:41 GMT-3