From: Georg Pauwen (pauwen@hotmail.com)
Date: Sun Dec 08 2002 - 05:56:28 GMT-3
GHi Gareth,
try Console port set for 9600 baud, 8 data bits, 2 stop bits, no parity, see
if this works.
Regards,
Georg
>From: "Gareth Bromley" <gbromley@intstar.com>
>Reply-To: "Gareth Bromley" <gbromley@intstar.com>
>To: <ccielab@groupstudy.com>
>Subject: Lightstream LS100 funnies
>Date: Sun, 8 Dec 2002 07:14:54 -0000
>
>As subject:
>
>Recently picked up a LS100 with OC3 and T3 ATM mods. The unit boots fine
>and
>displays to terminal across standard Cisco cable with cisco DB9 connectors
>(male on LS100, female on PC). However, when I press any key nothing
>happens.
>I've tried both console ports on the LS100.
>
>The terminal settings are 9600 8N1 and I've tried flow control on/off,
>hardware none etc.. all to no avail. This kid of makes me think its either:
>- Wrong cable?? missing say a transmit?
>- Faulty unit?
>
>Any thoughts
>
>Gareth
>.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:40 GMT-3