From: LoizosCisco (david_steven2001@yahoo.com)
Date: Sun Dec 08 2002 - 01:55:10 GMT-3
Am I missing something here??????
All you have to do is use monitor session source and
monitor session destination commands the same way you
do with SPAN command on 5000 switches.
--- Chuck Church <cchurch@optonline.net> wrote:
> By the sound of it, they wanted a solution done on
> the switch. In the real
> world I'd do like you said though, only capture the
> traffic that I'm looking
> for.
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
>
>
> ----- Original Message -----
> From: "Karl Young" <kaelwyoung@netscape.net>
> To: ""Chuck Church"" <cchurch@optonline.net>;
> ""Massimiliano Tognon""
> <mtognon@tecnonetspa.it>; <ccielab@groupstudy.com>
> Sent: Saturday, December 07, 2002 2:43 PM
> Subject: Re: question about 3550
>
>
> > Chuck,
> > It seems that all they ask is for you to
> Mirror one port to a
> second port period.You can then use the Protocol
> Analyzer to monitor IP only
> traffic on the mirrored port .
> > Karl
> >
> > Viz:
> >
> >
>
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration
> _guide_chapter09186a008007f3d5.html#14293
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:40 GMT-3