Re: Show IP BGP neighbors

From: Dave Meyer (dave.meyer@db.com)
Date: Fri Dec 06 2002 - 19:13:40 GMT-3

actually " routes " displays advertised routes to a neighbor & received routes are from that neighbor

                                                                                                                                   
                      MADMAN
                      <dave@interprise. To: sam <sam@avtechusa.com>, ccielab@groupstudy.com
                      com> cc:
                      Sent by: Subject: Re: Show IP BGP neighbors
                      nobody@groupstudy
                      .com
                                                                                                                                   
                                                                                                                                   
                      12/06/02 04:37 PM
                      Please respond to
                      MADMAN
                                                                                                                                   
                                                                                                                                   

 I got private response back but thought I would share the answer:

'routes' only displays accepted routes, 'received-routes' displays all
routes from a neighbor wether rejected or accepted.

 If I wasn't soo lazy I could have looked in the command referance:(

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fiprrp_r/bgp_r/1rfbgp2.htm#1022700

 Dave

MADMAN wrote:
>
> Hmm, looks the same too me, I have always just used the
> recieved-routes command.
> What's the differance between "received routes" and "routes learned
> from"??
>
> QWEST-T3RTR#sh ip bgp nei x.x.x.x ?
> advertised-routes Display the routes advertised to a BGP neighbor
> dampened-routes Display the dampened routes received from neighbor
> flap-statistics Display flap statistics of the routes learned from
> neighbor
> paths Display AS paths learned from neighbor
> received-routes Display the received routes from neighbor
> routes Display routes learned from neighbor
> | Output modifiers
> <cr>
>
> sam wrote:
> >
> > Hi, I can't find this, but I hope someone can help clear up the
> > confusion
> >
> > What is the purpose in using
> >
> > SHOW IP BGP NEIGHBORS 1.1.1.1 RECEIVED-ROUTES
> >
> > Converse to
> >
> > SHOW IP BGP NEIGHBORS 1.1.1.1 ROUTES
> >
> >
> > Any help would be greatly appreciated.
> > Thanks
> >
> > Sam Sena
> > .
> --
> David Madland
> CCIE# 2016
> Sr. Network Engineer
> Qwest Communications
> 612-664-3367
>
> "You don't make the poor richer by making the rich poorer." --Winston
> Churchill
> . 

--
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

"You don't make the poor richer by making the rich poorer." --Winston
Churchill
.
--

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
.

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:40 GMT-3