From: MADMAN (dave@interprise.com)
Date: Fri Dec 06 2002 - 17:19:54 GMT-3
Hmm, looks the same too me, I have always just used the
recieved-routes command.
What's the differance between "received routes" and "routes learned
from"??
QWEST-T3RTR#sh ip bgp nei x.x.x.x ?
advertised-routes Display the routes advertised to a BGP neighbor
dampened-routes Display the dampened routes received from neighbor
flap-statistics Display flap statistics of the routes learned from
neighbor
paths Display AS paths learned from neighbor
received-routes Display the received routes from neighbor
routes Display routes learned from neighbor
| Output modifiers
<cr>
sam wrote:
>
> Hi, I can't find this, but I hope someone can help clear up the
> confusion
>
> What is the purpose in using
>
> SHOW IP BGP NEIGHBORS 1.1.1.1 RECEIVED-ROUTES
>
> Converse to
>
> SHOW IP BGP NEIGHBORS 1.1.1.1 ROUTES
>
>
> Any help would be greatly appreciated.
> Thanks
>
> Sam Sena
> .
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill .
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:40 GMT-3