From: Larson, Chris (CLarson@usaid.gov)
Date: Fri Dec 06 2002 - 15:02:07 GMT-3
One of the things missed by me is I forget to do a frame-relay map bridge
command in my frame config. I don't know if that is your issue but....... I
forget it sometimes.
> -----Original Message-----
> From: Corbin, Kevin [SMTP:Kevin.Corbin@LibertyMutual.com]
> Sent: Friday, December 06, 2002 10:42 AM
> To: Nathan Chessin
> Cc: ccielab@groupstudy.com
> Subject: RE: Bridge over Frame Relay
>
> I think you would have to use point-to-point subinterfaces and configure
> each of them in the bridge group, then the router would treat them as
> different interfaces and I don't believe that you would have this issue.
> I have not done this with FR, but I have done a similar config with ATM
> subinterfaces.
>
> -----Original Message-----
> From: Nathan Chessin [mailto:nchessin@cisco.com]
> Sent: Friday, December 06, 2002 2:03 AM
> To: 'Hoang Duc Phuong'
> Cc: ccielab@groupstudy.com
> Subject: RE: Bridge over Frame Relay
>
>
> I guess you run into a problem when you broadcast. If you think about it,
> when a switch (bridge) receives a packet that it doesn't know the
> destination, it broadcast out all ports, except the one the it was learned
> on.
>
> In a hub and spoke environment, if what I am thinking is correct, won't
> broadcast a packet out of a the interface it learned it through, even
> though they are on different PVC's.
>
> I don't really have any crazy configs, just thinking conceptually and
> wondering how this will affect bridging.
>
>
> Nate
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Hoang Duc Phuong
> > Sent: Friday, December 06, 2002 10:33 PM
> > To: Nathan Chessin
> > Cc: ccielab@groupstudy.com
> > Subject: Re: Bridge over Frame Relay
> >
> >
> > Could you post your configuration !
> > In my opinion ! You can bridge like bridging over IP network ... right
> > ?
> >
> > Phuong
> >
> > ----- Original Message -----
> > From: "Nathan Chessin" <nchessin@cisco.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Friday, December 06, 2002 12:22 PM
> > Subject: Bridge over Frame Relay
> >
> >
> > > Hi All,
> > >
> > > I am having trouble bridging over Frame Relay. Can somone
> > explain the
> > > issues related to bridging over Frame in a hub and spoke
> > environment. For
> > > example, does the hub have to be the root, etc.
> > >
> > > Thanks,
> > >
> > >
> > > Nate
> > > .
> > .
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:39 GMT-3