From: Lupi, Guy (Guy.Lupi@eurekaggn.com)
Date: Fri Dec 06 2002 - 09:51:28 GMT-3
An easy way to do this would be to use the "show run | include [ip string]",
but it won't necessarily show you whether or not your IP is in the list,
depending on how general the list is. If your IP is 64.64.64.1, I would try
a "show run | include 64", it will show you any line in the configuration
that contains a 64, if your access list is specific enough, you would see
the statement denying or allowing anything with a 64 in the first octet.
-----Original Message-----
From: Andrey.Lysyuk@incom.kiev.ua [mailto:Andrey.Lysyuk@incom.kiev.ua]
Sent: Friday, December 06, 2002 6:18 AM
To: ccielab@groupstudy.com
Subject: How to check access-lists?
Hello, everybody!
Does anybody can tell me how I can verify if certain access-list permit or
deny certain IP Address.
When the list is relatively small this can be dona manually. But if that
access-list consists of 40-50 lines?
Thanx in advance.
Andrew Lysyuk.
.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:39 GMT-3