From: Cisco Engineer (ciscocalifornia@yahoo.com)
Date: Thu Dec 05 2002 - 18:04:37 GMT-3
Is this true ?
all routes (including summary information)are
replicated among RIP adatbases but the necessary
routes are only injected into the route table from the
database. If that is true "no auto-summary" or for
that matter "auto-summary" should be localy
significant.
Just thinking, may be completely wrong. But it makes
sense.
Thanks
Joy
--- Joe Martin <jmartin@capitalpremium.net> wrote:
> So what is the "show ip rip database" command
> showing me? Again, just to
> clarify, the summary route is only showing up in the
> RIP database and not in
> the route table. So maybe the "no auto-summary"
> command doesn't remove the
> summary routes from the RIP database, it just
> doesn't post them in the route
> table.
>
> Can anyone confirm that?
>
> Thanks,
>
> Joe Martin
>
> -----Original Message-----
> From: Joe Chang [mailto:changjoe@earthlink.net]
> Sent: Thursday, December 05, 2002 12:01 PM
> To: MOLINA, MARTIN J (PBI); 'Joe Martin'; CCIE
> GroupStudy
> Subject: Re: RIP Auto-summary
>
>
> I thought RIP doesn't keep its own database. All it
> uses to store its routes
> the routing table itself.
>
> ----- Original Message -----
> From: "MOLINA, MARTIN J (PBI)" <mm1343@sbc.com>
> To: "'Joe Martin'" <jmartin@capitalpremium.net>;
> "CCIE GroupStudy"
> <ccielab@groupstudy.com>
> Sent: Thursday, December 05, 2002 2:59 PM
> Subject: RE: RIP Auto-summary
>
>
> > Interesting. I have a bad habit of relying on the
> route table as opposed
> to
> > the database. As a result, I haven't spent much
> time reviewing the
> database.
> >
> >
> >
> > -----Original Message-----
> > From: Joe Martin
> [mailto:jmartin@capitalpremium.net]
> > Sent: Thursday, December 05, 2002 10:54 AM
> > To: MOLINA, MARTIN J (PBI); CCIE GroupStudy
> > Subject: RE: RIP Auto-summary
> >
> >
> > I was running v1 with discontiguous subnets just
> to see what the debugs
> >
> > would look like. I knew this would not work.
> Then I switched to v2 and
> the
> >
> > discontiguous subnets show up in the RIP database,
> but so do the summary
> >
> > routes, even after a reload.
> >
> >
> >
> > -----Original Message-----
> >
> > From: MOLINA, MARTIN J (PBI)
> [mailto:mm1343@sbc.com]
> >
> > Sent: Thursday, December 05, 2002 11:45 AM
> >
> > To: 'Joe Martin'; CCIE GroupStudy
> >
> > Subject: RE: RIP Auto-summary
> >
> >
> >
> >
> >
> > This might be a silly question but are you running
> RIP Version 2 ?
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> >
> > From: Joe Martin
> [mailto:jmartin@capitalpremium.net]
> >
> > Sent: Thursday, December 05, 2002 9:32 AM
> >
> > To: CCIE GroupStudy
> >
> > Subject: RIP Auto-summary
> >
> >
> >
> >
> >
> > Why, if I enter the "no auto-summary" command
> under the RIP process, do I
> >
> >
> >
> > still have summary routes at the classful boundary
> in the RIP database?
> >
> >
> >
> >
> >
> >
> >
> > Maybe just a total brain fart? What am I missing?
> >
> >
> >
> >
> >
> >
> >
> > Thanks,
> >
> >
> >
> >
> >
> >
> >
> > Joe Martin
> > .
> .
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:39 GMT-3