Dialer profiles and broadcast

From: John Tafasi (johntafasi@yahoo.com)
Date: Tue Dec 03 2002 - 20:08:50 GMT-3

• Next message: Benny Chong: "OT: Cisco CD --- software expire?"
• Previous message: John Tafasi: "Re: ntp stateless packet"
• Next in thread: Brian McGahan: "RE: Dialer profiles and broadcast"
• Maybe reply: Brian McGahan: "RE: Dialer profiles and broadcast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I am using dialer profiles on r2 below and wants protocol broadcast such as
rip to be sent out accross the isdn link to r5. I tried to find the command
that allows me to configure broadcast but dialer interfaces do not accept
the dialer map command. Does any body of you know?

hostname r2
!
interface BRI0
 no ip address
 no ip directed-broadcast
 encapsulation ppp
 dialer pool-member 1
 isdn spid1 0835866101
 isdn spid2 0835866301
!
interface Dialer1
 ip address 10.10.10.1 255.255.255.0
 no ip directed-broadcast
 encapsulation ppp
 dialer remote-name r5
 dialer string 8358662
 dialer pool 1
 dialer-group 1
 pulse-time 0
 ppp chap hostname r2

• Next message: Benny Chong: "OT: Cisco CD --- software expire?"
• Previous message: John Tafasi: "Re: ntp stateless packet"
• Next in thread: Brian McGahan: "RE: Dialer profiles and broadcast"
• Maybe reply: Brian McGahan: "RE: Dialer profiles and broadcast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:38 GMT-3