From: Abdallah Al-Suwailem (aalsuwailem@myrealbox.com)
Date: Thu Nov 28 2002 - 14:58:44 GMT-3
Hello
Is the ILMI enough for discovering VPI/VCI from the switch ?
and Why in your cofiguration you use "no atm ilmi-keepalive" ?
Thanks
Abdallah
Andrew Bratchell wrote:
>Derek,
>
>Configure the ATM interface for PVC discovery.
>Something this would do the trick.
>
>interface ATM1/0
> ip address 1.1.1.1 255.255.255.0
> no atm ilmi-keepalive
> atm ilmi-pvc-discovery
> pvc 0/16 ilmi
>!
>This execute the command show atm pvc to see the VPI/VCI pair.
>
>Andy
>
>-----Original Message-----
>From: Derek Gaff [mailto:derekgaff@eircom.net]
>Sent: 28 November 2002 14:17
>To: ccielab@groupstudy.com
>Subject: ATM, Discover ATM VCI and VPI Information
>
>
>Hi All
>
>Quick question, If I have and ATM interface and I am only given the IP address
>and I need to discover the VCI, VPI information to add to my configuration,
>does anybody now how this is accomplished.
>
>Cheers
>Derek
>
>
>**********************************************************************
>Disclaimer
>This email is confidential and intended solely for the use of
>the individual to whom it is addressed. Any views or opinions
>presented are solely those of the author and do not necessarily
>represent those of CAE Office Systems. If you are not the
>intended recipient, be advised that you have received this
>email in error, and that any use, dissemination, forwarding,
>printing or copying of this email is strictly prohibited. If you
>received this email in error, please contact Lee Gatland on
>+44 (0) 1923 477600
>**********************************************************************
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3