From: G. R. Correia (razzolini80@hotmail.com)
Date: Thu Nov 28 2002 - 12:25:30 GMT-3
you could try aggregate- address:
# aggregate-address 192.168.0.0 255.255.252.0 suppress-map test
#route-map test permit 10
# match ip address prefix suppressed-routes
# ip prefix-list suppressed-routes seq 5 permit 192.168.1.0/24
#ip prefix-list suppressed-routes seq 10 permit 192.168.2.0/24
#ip prefix-list suppressed-routes seq 15 permit 192.168.3.0/24
#ip prefix-list suppressed-routes seq 20 permit 192.168.0.0/24
this way only the aggregate will be advertised, and the most specific
routes will be suppressed.
HTH
Guilherme
>From: "Peter Wodle" >Reply-To: "Peter Wodle" >To: ccielab@groupstudy.com
>Subject: BGP Summary address without using Summary command >Date: Thu,
28 Nov 2002 09:25:01 -0500 > >I have a number of subnets on BGP router
Rb. Want this Rb to foward >only a single address to Rc (a IGBP peer).
But do not want to use >the summary-address or summary-only commands. Any
ideas what else I >can use? Can someone point to a ref pls. > > > > >
>_________________________________________________________________ >The
new MSN 8: smart spam protection and 2 months FREE*
>http://join.msn.com/?page=features/junkmail
------------------------------------------------------------------------
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3