From: Andrew Bratchell (a.bratchell@caeuk.com)
Date: Thu Nov 28 2002 - 11:47:43 GMT-3
Derek,
Configure the ATM interface for PVC discovery.
Something this would do the trick.
interface ATM1/0
ip address 1.1.1.1 255.255.255.0
no atm ilmi-keepalive
atm ilmi-pvc-discovery
pvc 0/16 ilmi
!
This execute the command show atm pvc to see the VPI/VCI pair.
Andy
-----Original Message-----
From: Derek Gaff [mailto:derekgaff@eircom.net]
Sent: 28 November 2002 14:17
To: ccielab@groupstudy.com
Subject: ATM, Discover ATM VCI and VPI Information
Hi All
Quick question, If I have and ATM interface and I am only given the IP address
and I need to discover the VCI, VPI information to add to my configuration,
does anybody now how this is accomplished.
Cheers
Derek
**********************************************************************
Disclaimer
This email is confidential and intended solely for the use of
the individual to whom it is addressed. Any views or opinions
presented are solely those of the author and do not necessarily
represent those of CAE Office Systems. If you are not the
intended recipient, be advised that you have received this
email in error, and that any use, dissemination, forwarding,
printing or copying of this email is strictly prohibited. If you
received this email in error, please contact Lee Gatland on
+44 (0) 1923 477600
**********************************************************************
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3