From: Jake Jake (spage@nc.rr.com)
Date: Wed Nov 27 2002 - 19:54:50 GMT-3
Its because Bc and CIR are different for each PVC
Bc=CIR*Tc
PVC 516 -- 7000=56000(.125)
pvc 703 -- looks like your burst is set higher than CIR here..im guessing a
manual config of Bc=64000 under frame relay traffic shaping
Jake.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
jl yan
Sent: Wednesday, November 27, 2002 1:28 AM
To: ccielab@groupstudy.com
Subject: FR traffice-shaping interval time
Who know why the two PVC's interval time is different in the following
example and how to change it? thanks.
R4#sh traffic-shape
Interface Se1
Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
516 56000 875 7000 0 125 875 -
703 48000 1000 64000 0 167 1000 BECN
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3