From: Neil Moore (neil@droopy.com)
Date: Wed Nov 27 2002 - 16:21:30 GMT-3
If you do not need it to be a policy...
interface Ethernet0
ip helper-address 192.168.20.1
----------------------------------------
Neil Moore CCIE#10044
----- Original Message -----
From: "Jung, Jin" <jin.jung@lmco.com>
To: "ccie" <ccielab@groupstudy.com>
Sent: Wednesday, November 27, 2002 1:32 PM
Subject: Route-map ,, is this possible,
> I am trying to write a policy routing for BootP server
>
> Host ----switch -----E0 router E1----BootP server.
>
> I need to make the destination address of bootP reply from BootP server to
> be a local broadcast address address of host network.
>
> Router
> Int e 0
> #host network
> Ip address 192.168.10.1 255.255.255.0
> Int e 1
> #BootP server network.
> Ip address 192.168.20.1 255.255.255.0
>
>
> Route-map bootpconv permit 10
> Match ip address 168
> Set ??????
>
>
> Access-list 168 tcp permit host 192.168.20.2 192.168.10.0 255.255.255.0 eq
> 68
>
> Host = 192.168.10.2
> BootP server = 192.168.20.2
> Local host Broadcast = 192.168.10.255
>
> BootP server sends the BootP reply to 192.168.10.2 need to change to
> 192.168.10.255
>
>
> Is this possible?
>
> Or do you know any other way to get this working?
>
> txxx
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:11 GMT-3