From: Erick B. (erickbe@yahoo.com)
Date: Mon Nov 25 2002 - 01:27:05 GMT-3
Adarsh,
Policy based routing (PBR) can be used for this.
--- Adarsh Singh <adarshs@hclinfinet.net> wrote:
> Hi Erick,
>
> Thanks for the reply on offset it helps , but i am
> stuck with one issues
> i.e i have servers based in HUB , HUB & Spoke are
> connected through the
> Leased line & VSAT , eigrp is running between them .
> Now we want to send the traffic from the server1 &
> server 2 at HUB through
> Leased line to spoke , and the rest of the traffic
> through VSAT , once the
> Leased line down , then the traffic for the server 1
> & server 2 at HUB
> should move to VSAT .
>
> I tried using offset list offset-list 1 out 20000000
> Serial0/0, but the
> offset command doesnt take extended access-list so
> with out it i am not
> able to send the just the traffic originating from
> the server1 & server 2 to
> the SPOKE through Leased line , any idea on this
>
> Adarsh
> ----- Original Message -----
> From: "Erick B." <erickbe@yahoo.com>
> To: "Adarsh Singh" <adarshs@hclinfinet.net>;
> <ccielab@groupstudy.com>
> Sent: Saturday, November 23, 2002 10:31 AM
> Subject: Re: How to change metric on EIGRP
>
>
> > Sure, but he'll only be able to change the
> distance of
> > the selected EIGRP internal route - not external
> EIGRP
> > route. See the recent thread on this.
> >
> > --- Adarsh Singh <adarshs@hclinfinet.net> wrote:
> > > Will distace work if mapped to remote wan ip
> > > address on the leased line at
> > > HUB.
> > >
> > > ----- Original Message -----
> > > From: "Erick B." <erickbe@yahoo.com>
> > > To: "Adarsh Singh" <adarshs@hclinfinet.net>;
> > > <ccielab@groupstudy.com>
> > > Sent: Friday, November 22, 2002 3:10 PM
> > > Subject: Re: How to change metric on EIGRP
> > >
> > >
> > > > offset-list
> > > >
> > > > --- Adarsh Singh <adarshs@hclinfinet.net>
> wrote:
> > > > > Hi All,
> > > > >
> > > > > I have 2 eigrp routes in the router , one
> > > through
> > > > > leased line & second
> > > > > thrrough VSAT.
> > > > >
> > > > > It is HUB & SPOKE technology , could you
> tell
> > > me
> > > > > how do i set the metric at
> > > > > the SPOKE or HUB so that first preffered
> path is
> > > > > leased line & second one is
> > > > > VSAT.
> > > > > How do i change the metric ?
> > > >
> > > >
> > > >
> __________________________________________________
> > > > Do you Yahoo!?
> > > > Yahoo! Mail Plus - Powerful. Affordable. Sign
> up
> > > now.
> > > > http://mailplus.yahoo.com
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> > http://mailplus.yahoo.com
>
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:09 GMT-3