From: Jennifer Bellucci (Jennifer_bellucci@hotmail.com)
Date: Sat Nov 23 2002 - 02:38:43 GMT-3
I thought it was the phones as well, being cheap and all. I changed the
phones. Same problem. At least you could get one dial-tone to work at a
time, meaning that you could use the second one right? I am just getting air
in the second one.
----- Original Message -----
From: <Dan.Thorson@seagate.com>
To: "Jennifer Bellucci" <Jennifer_bellucci@hotmail.com>
Cc: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
Sent: Saturday, November 23, 2002 5:13 AM
Subject: Re: FXS card 2620
>
> What kind of analog phone have you attached? I had some old POTS phones
> connected to my FXS's, and I found that I could only get dial-tone on one
> at a time.... very weird. I then got two cheapy modern phones, and now
> all's well.... so I suspect that the older phones loaded the line more
than
> the Cisco FXS ports can handle. Very odd, but perhaps it's what you're
> seeing.
>
>
> ========================================
> Dan Thorson - Seagate Technology, LLC
> desk +1 (952) 402-8293 fax +1 (952) 402-1007
> SeaTel 8-402-8293
> ========================================
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:09 GMT-3