From: Erick B. (erickbe@yahoo.com)
Date: Sat Nov 23 2002 - 01:56:00 GMT-3
Also, on the router you're calling you can do a 'show
voice call summ' and see the call status (connect,
setup, etc). This is if you're picky and want to see
something on the router. Debugs also will show you
something.
--- Phil <ciscostudent1@yahoo.com.br> wrote:
> Jennifer, the command is "csim start xxxx". xxxx
> being the extension number:
> r6#csim start 3333
> > csim: called number = 3333, loop count = 1 ping
> count = 0
> >
> > csim: loop = 1, failed = 1
> > csim: call attempted = 1, setup failed = 1, tone
> failed = 0
>
> Note that the output above is from a working config.
> The "failed=1" means nobody picked up the phone. If
> the phone had been picked up you'd see "failed=0"
> (could be an answering machine responding also)
>
> Phil
>
>
>
>
> Jennifer Bellucci <Jennifer_bellucci@hotmail.com>
> wrote:Is there a way to test config's for VO IP/FR
> or ATM, without physically being
> next to the routers? I am renting some racktime
> shortly and was just
> wondering.
> Without being there physically, is it even possible?
> I know you could check
> the config and routes...but its not the same.
>
> Thanks
>
> Jennifer Bellucci
>
> Jennifer_bellucci@hotmail.com
>
>
> ---------------------------------
> Yahoo! GeoCities
> Tudo para criar o seu site: ferramentas faceis de
> usar, espago de sobra e acesssrios.
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:09 GMT-3