From: Keyur Shah (kshah@hellocomputers.com)
Date: Fri Nov 22 2002 - 21:51:02 GMT-3
These links might help,
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_
c/wcdfrely.htm#xtocid91
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/fun_
c/fcprt1/fcd102.htm#xtocid1
-Keyur Shah-
CCIE# 4799 (Security;R/S)
CISSP,ccsa,css1,scsa,scna,mcse,mct,mcne,cni
Hello Computers
"Say Hello To Your Future!"
http://www.hellocomputers.com
-----Original Message-----
From: Mark Vann [mailto:linuxmanvan@yahoo.com]
Sent: Friday, November 22, 2002 2:06 PM
To: ccielab@groupstudy.com
Subject: auto install question
Can someone guide me to a document or example of the
compents required setup autoinstall on frame relay? I
need routerA in serial 0/0 , dlci 101, to provide
new_routerA on the other end of the pvc also on dlci
101 a config named newrouterconfig.txt from tftp
server 10.0.0.1 .
Any ideas guys?
Thanks
=====
Mark Vann
CCNP, CCNA, CCDA, Network+
Equant, Atlanta
Network Engineer
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:09 GMT-3