From: KHAN, IFTIKHAR A (IKHAN@scana.com)
Date: Fri Nov 22 2002 - 18:36:50 GMT-3
I tried Mask but it was not working like
network 155.100.122.0 0.0.0.0 area 20
area 20 range 155.100.122.0 255.255.255.0
only way I was able to work is
network 155.100.122.0 0.0.0.255 area 20
any ideas
Iftikhar
-----Original Message-----
From: Robert Rech [mailto:brech@kc.rr.com]
Sent: Friday, November 22, 2002 1:38 PM
To: KHAN, IFTIKHAR A
Subject: Re: Solie Enchilada
network 155.100.122.0 0.0.0.0 area 20
Looks like a problem with the mask this would only run on an interface with
an address of 15.100.122.0.
Try using the range command with the mask you have in the second example.
----- Original Message -----
From: "KHAN, IFTIKHAR A" <IKHAN@scana.com>
To: <ccielab@groupstudy.com>
Sent: Friday, November 22, 2002 8:45 AM
Subject: Solie Enchilada
> I configured OSPF on R2 I am advertising its loopback interface like
>
> router ospf 1
> network 155.100.32.32 0.0.0.31 area 20
> network 155.100.34.0 0.0.0.255 area 0
> network 155.100.122.0 0.0.0.0 area 20
> area 0 authentication message-digest
> area 20 range 155.100.122.0 255.255.255.0
>
> but it is not showing its loopback network on other routers routing table
> but if I configure it like this
>
> router ospf 1
> network 155.100.32.32 0.0.0.31 area 20
> network 155.100.34.0 0.0.0.255 area 0
> network 155.100.122.0 0.0.0.255 area 20
> area 0 authentication message-digest
>
> It works fine
>
> Solution that I downloaded from Ciscopress.com is using first way is
there
> any one can explain why its not working with first method what is wrong in
> that method looks fine to me .
> I am running 12.1 IOS on all routers
>
> Thanks
>
>
> > Iftikhar Khan
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:09 GMT-3