From: Marshall Stacks (catheadcatheadcathead@hotmail.com)
Date: Thu Nov 21 2002 - 11:21:52 GMT-3
Hi,
I am working ASET lab #1. The instructions for R7 say "Discover your
VPI/VCI pair, and then manually configure them in your configuration".
I am interpreting this to mean that I should use pvc discovery.
I am not discovering any PVCs, although my ilmi debug is showing
that I am indeed at least talking to the ATM switch. My hazy idea of
what should happen is: I configure pvc discovery, exit config, do
a "show atm pvc", see some learned pvcs, go back into config mode
and manually enter those learned pvcs using "pvc" command.
I am following the instructions given in (Creating PVC Discovery):
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_c/wcdatm.htm#xtocid8
My config at this point looks like:
interface ATM1/0
ip address 120.20.70.7 255.255.255.0
no atm ilmi-keepalive
atm ilmi-pvc-discovery
pvc 0/5 qsaal <---- I put this in as desperation set in
!
pvc 0/16 ilmi
!
R7#sho atm pvc
Interface Name VPI VCI Type Encaps SC Sts
1/0 3 0 5 PVC SAAL UBR UP
1/0 2 0 16 PVC ILMI UBR UP
Am I totally barking up the wrong tree here?
THANKS
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:08 GMT-3