From: jfaure@sztele.com
Date: Wed Nov 20 2002 - 07:55:43 GMT-3
Hi guys!
I've a problem with a 6400 chassis . This is the first 6400 I've seen and
i'm not familiar with this equipment operation.
Well, this is the problem. Our customer has a 6400 in service and last
weekend they added a second NLC in it. Currently they have two NRP and two
NSP in redundancy mode. After adding the second NLC, that was correctly
recognized by the system, they can't configure any PVP associated to the
new NLC (they put the command but the sistem says something like
"unrecognized command")
The pvp they want to configure are in this type (totally similar as the
first NLC has configured)
atm pvp 1 hierarchical rx-cttr 102 tx-cttr 102
Do you know if there is some software limitation about these task when you
have two NLC in the chassis?
I attach sh tech of the 6400 NSP to see the config and modules.
Any help would be apreciated.
Regards
(See attached file: sh tech- NSP6400 .txt)
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
[GroupStudy.com removed an attachment of type application/octet-stream which had a name of =?iso-8859-1?Q?sh_tech-_NSP6400_.txt?=]
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:07 GMT-3